fiber laser marking machine

Detailed Product Description

it is not influenced by bad circumstance and temperature change:may use the accumulator cell and an automobile smoke under the power cut condition and so on carries on the operation.

before fiber laser appeared,laser marking system normally adopts continuous or pulse output CO2 laser tube ND-YAG laser tube as laser source.Compared with traditional laser source,the performance of fiber laser is more excellent ,Radition angle is 1/4 of Diode-pumped laser tube (more suitable for precise and fine marking )the conversion efficiency of electro-optic is 1/10 of lamp pumped soild laser marker:the average working,time reaches 100,000 hours

Fiber laser is a type of full air cooling ,so it doesn't need refrigerant device,freezing water pipe or temperture controller,the volume is reduced,energyconsumpition is decreased,so the use cost of use cost of user is much lower than use cost  of traditional laser marking system.the pulse of ETL fiber laser is 10-100KHZ repeat frequency working,the volume of the fiber laser which average power output is 10W-20W is only 46X160 is working in low voltage,the conversion efficiency of electro-optic is up to 70%,and driving power supply can use UPS power when the power supply when the power is shut off the power consumption is only 160W